In the Kobold Robot app, I’m getting the message, “Please check wheels”

Vorwerk UK

27 April 2018 09:56

Cause

One or both wheels on your robot vacuum cleaner have become blocked.

Recommended action

Check for anything that is obstructing the wheels and remove it.

If the error still occurs, or there is no obvious cause of the blockage, please contact customer care.

Comments

0 comments

Please sign in to leave a comment.

Articles in this section

The Kobold robot app is showing the error “clear path” but there is nothing in the way. What does that mean?
I recently set spot cleaning to 4x4m mode using the Kobold robot app. I have just started spot cleaning again from the device itself, but the VR300 robot vacuum cleaner is only cleaning a 2x2m area!
I want to send the VR300 out to vacuum, but it just beeps and the [light display] flashes.
The Wi-Fi light on my VR300 robot vacuum is flashing.
I've unpacked the VR300 robot vacuum cleaner and now it won't switch on. Is it broken?
I pressed the green Start button on my VR300 robot vacuum cleaner. The [light display] flashed, then I pressed the green Start button again. The VR300 still didn't go anywhere!
The [display] on the VR300 robot vacuum cleaner lights up red.
The VR300 keeps reporting that the dust container needs to be emptied, but the container is never actually full. Is there something wrong with a sensor somewhere?
I pressed “Spot” on the device and then the green Start button, but the VR300 robot vacuum cleaner doesn't go anywhere!
I wanted to switch on spot cleaning, but the VR300 goes back to the base station instead!

See more