It is normal for the robot to touch objects. When it recognizes an obstacle, its three ultrasound sensors on the front bumper/fender cause it to slow down, so that the bumper can gently push against the obstacle. The robot then uses this contact to work out how to move around the obstacle. For this to work, the obstacle has to be heavy enough for the sensor behind the bumper to be activated. Generally speaking, you should remove light objects from the floor in order to ensure thorough cleaning.
Articles in this section
- Connect the Kobold VR300 robot to the mobile application
- Path Blocked
- Why do I get a message to check the filter?
- The path to a zone is blocked (2013)
- My vacuum cleaner robot is displayed as offline. What could be the reason?
- The Base light on my VR300 robot vacuum cleaner comes on, but the Base button is greyed out in the Kobold Robot app. How do I send the VR300 back to the base station using the app?
- The display on the VR300 robot vacuum cleaner is flashing red and the device won't clean any more. Why is this?
- Why is the Wi-Fi light on my VR300 robot vacuum flashing?
- I've unpacked the VR300 robot vacuum cleaner and now it won't switch on. Is it broken?
- The Kobold Robot app is showing the error “clear path” but there is nothing in the way. What does that mean?