- Open the filter compartment.
- Next, remove the FP265/FP270 premium filter bag from the device.
- Press on the latch 2a 2b at the top of the support grid frame (2) on the motor protection filter.
- Remove the white support grid frame holding the old motor protection filter.
- Dispose of the old filter.
- Place the new motor protection filter (1) into the support grid frame.
- Insert the complete yellow support grid frame into the mount 2a 2b at the bottom.
- Allow the upper latch 2a 2b to click into place.
- Put the premium filter bag back into the device. Please note that the filter cover will not close if the premium filter bag is not in place.
- Close the filter compartment. The device is then ready for use
Comments
0 comments
Article is closed for comments.