Comments: UK has no VR100
Cause: You have started the cleaning process in normal cleaning mode from a location other than the base station.
Solution: If you start the robot at a different location in the room, it will return to this location after cleaning.
Cause: The base station or robot is not properly connected to the power supply.
Remedy: Make sure that the power supply unit and power plug are properly connected to the base station or robot connector. Also, make sure that the power supply and plug are properly plugged into the wall outlet.
Cause: The sensors on the base station or several sensors of the robot are covered or dirty.
Remedy: Remove the objects that cover the robot's sensors.
Cause: The base station is behind a wall or another obstruction that is blocking the signal.
Remedy: Move the base station to another location. Make sure that there are no obstacles within an area of 1 m around the base station.
Cause: You have cleaned an area using the Spot cleaning mode.
Remedy: When the robot has cleaned the area, it stops automatically. In normal cleaning mode, the robot automatically returns to the base station.