Comments: UK has no VR100
Cause: You have selected the Spot cleaning mode. In this mode, the robot stops after the set area has been cleaned.
Solution: If you want to clean the rest of the room, select the normal cleaning mode and press the Start button.
Cause: The floor sensors are excessively dirty. If the floor sensors become clogged with dirt, their functionality for proper cleaning and object detection may not always be fully guaranteed. Accordingly, if the floor sensors become excessively dirty, the unit switches itself off automatically to prevent accidents.
Remedy: Clean the floor sensors on the underside of the robot with a cotton swab or a soft, clean cloth, but never with pointed or sharp objects. After cleaning, restart the robot.