Recommended wear check: VC100 filter

Remove the Kobold VC100 filter

1. Press the release button (2) on the dust chamber (1) and remove the dust chamber from the device.
2. Keep the dust chamber’s nozzle opening pointing downwards.
3. Press the release button (2) again and remove the filter unit (5) from the dust chamber.

Insert the Kobold VC100 filter

1. When inserting the filter unit (5), make sure that the larger indentation (5a) is in line with the release button (2) on the dust chamber (1).
2. Hold the release button down and push the filter unit into the dust chamber until it engages.