The Pulilava Kobold VK7 is a revolutionary appliance for wet and dry cleaning of hard floors that allows you to vacuum and wash in a single step with considerable savings in time and effort. Thus, the Pulilava Kobold VK7 cleans hard floors with great effectiveness.
The Kobold VK7 cleaning system offers a wide range of cloths and special detergents for thorough cleaning of any type of hard floor.
Before using the Kobold VK7, check the type of cloth most suitable for the floor to be treated.
Cloth preparation
Release the cloth holder plate by pressing the release mechanism on the rear left side of the Pulilava Kobold VK7 with your foot.
To fix the MF7 cloth to the cloth holder plate, push the cloth element into the cloth holder plate slot until it stops.
Lower the Pulilava Kobold VK7 on to the cloth holder plate. The cloth holder is inserted into the Pulilava Kobold VK7 with a perceptible sound.
The appliance is now ready to be used.
Tank preparation
For wet cleaning, the cloth can be automatically moistened using the tank of the Pulilava Kobold VK7.
Fill the green cap with Koboclean Universal or Koboclean Parquet up to the notch (3 ml) and then pour into the tank. Add tap water; do not exceed the maximum level on the tank.
Insert the tank into the Pulilava Kobold VK7.
Operation
Switch on the Kobold VK7 vacuum cleaner.
The Pulilava Kobold VK7 moistens the MF7 cloth with three different moisture levels: press the “manual mode” button on the handle of the vacuum cleaner for about 5 seconds to initiate full moistening of the cloth. Adjust the desired moisture level using the “manual mode” button, and start cleaning.
The following table shows the recommended moisture levels for various types of flooring.
Comments
0 comments
Article is closed for comments.