What do the different colors and lights on the SP600 LED display mean?

Vorwerk International Help Center

August 29, 2024 11:37

The LED display of the SP600 hard floor cleaner provides you with various information:


None of the three waves light up	Dry mode
1–3 waves show green lights	Moistening levels 1–3 are activated
All 3 waves flash green	Initially moistening started
All 3 waves flash orange	Fill water tank
All 3 waves light up red	An error has occurred
All 3 waves flash red	Water sucked into system

Comments

0 comments

Article is closed for comments.

Articles in this section

My floor is not mentioned in the instruction manual for the SP520/530 hard floor cleaner. How can I find out whether the hard floor cleaner is suitable for my floor?
Can I transport the SP600 hard floor cleaner if the tank is full?
What do the different colors and lights on the SP600 LED display mean?
What is the ‘dispense additional water’ function of the SP600 for?
How much water does the water tank of the SP600 hard floor cleaner hold, and how much water does it use?
Can I use SP520/530/600 cloths with other Vorwerk hard floor cleaners or vice versa?
Is there anything I should be aware of when using a SP520/SP530/SP600 hard floor cleaner with hard water?
Why are the parquet cloths for the SP520/530 hard wood cleaner not suitable for marble or granite floors?
What cleaning cloths are available for the SP520/530/600 hard floor cleaner?
How big are the cleaning cloths for the SP600 hard floor cleaner?

// Redirects

Helpcenter Survey