Basic information about Thermomix® Cutter
Which Thermomix® model is compatible with the Thermomix® Cutter?
The Thermomix® cutter has been designed for Thermomix® TM5 (manually) & Thermomix® TM6 (to be used with mode) and must not be used with the Thermomix® Friend, as the torque and the speed of TMF are not sufficient enough to produce satisfyable results.
Which is the right speed for the use of the Thermomix® Cutter?
Please only use speed 4 while using the Thermomix® Cutter.
How to remove heavy staining or colouring of the disc?
Some ingredients which are rich in beta-carotene, such as carrots, can cause heavy staining both on steel and on plastic parts of Cutter. To remove those stains efficiently without harming the disc, rub the stained parts with vegetable oil using a cotton ball or some kitchen paper, then wash normally with water and detergent. Please make sure you always handle the disc by the plastic hub when doing this. Do not use bleach to clean any Cutter part.
What is the material of the Thermomix® Cutter?
High grade plastic, BPA free; stainless steel.
What kind of recipes can I make using the Thermomix® Cutter?
Salads, side dishes, desserts where we can see immediately the cut whether sliced or grated. It can be used in ingredient preparation of all recipes that mention ingredients in slices in ingredient description.
Slice or grate all the food you want to use in a recipe before starting the recipe with your Thermomix®.
Which functions are available for the Thermomix® Cutter?
You can grate and slice with the cutter. You can either do thin or thick discs or slices.
- The slicing functions are on side 1 of the cutting disc (dark side), while the grating functions are on side 2 of the cutting disc (lightside).
- The thickness of slicing or grating is determined simply by the direction of rotation.
- Normal (clockwise) rotation will produce thick slices or strips, while anti-clockwise rotation results in thin slices or strips.
The right type of cut depends on placing the disc with the right side up. The modes can't take care of the correct placing of the disc.
A gentle and steady push is all you need for optimal cutting results. Basically you just need to guide down the pusher with your hand while ingredients are in the feeder tube of the cutter.
Is the Thermomix® Cutter dishwasher-safe?
Yes. Place all components loosely and separately in the dishwasher to avoid deformation resulting from exposure to high temperatures or pressure from items above or nearby.
Never soak your Cutting Disc in water to avoid possibility of oxidation.
The cutting disc can be cleaned in the dishwasher. However, we would recommend cleaning the cutting disc under running water with a washing-up brush. This will help to keep the high-quality blades sharp for longer.
How to use the Thermomix® Cutter?
Only place the Thermomix® Cutter into an empty mixing bowl. Make sure that there is no food or liquid in the mixing bowl, especially on the mixing knife, before placing the drive shaft onto the mixing knife. It is not necessary to thoroughly clean the mixing bowl before using the Thermomix® Cutter. Please make sure that the mixing bowl is correctly positioned and fully inserted in the Thermomix® TM6 or TM5.
1.Place the drive shaft (1) onto the mixing knife in the mixing bowl making sure it stands upright and stays in place.
2.Place the cutter basket (2) onto the drive shaft.
3. Hold the cutting disc (3) by the central plastic section (4) and place it onto the drive shaft with the side you want to use facing upwards.
4.Put the cutter lid (5) on the cutter basket.
How practical is the Thermomix® Cutter?
We created the Thermomix® Cutter to make your recipe preparation even more convenient and easy. With its ergonomic design and the dedicated container it does not interfere with the preparations done (before and after) inside the mixing bowl + front and back position of the feeder tube for convenience. From applied use perspective, it is an effort saver (as it avoids slicing or grating by hand).
The safety of Thermomix® Cutter?
It is safe to use. Lid & feeder tube prevent contact between the cutting disc and the fingers. Only use the pusher to feed the Cutter.
Handle the disc with care and hold it always by the plastic central hubs.
How many parts I have for Thermomix® Cutter?
1. Drive shaft
2. Cutter basket
3. Cutting disc
4. Cutter lid
How can I find recipes on Cookidoo® that I can use with the Thermomix® Cutter?
You will be able to find recipes when you type "Cutter" in the serach field on Cookidoo®.
However, you will be able to use the Thermomix® Cutter with much more reicpes than are officially marked. Whenever an ingredient in a recipe asks for slicing and grating, you can use the Cutter for this. Make sure it is the first recipe step that you do so you can prepare the ingredients before you start cooking.
Can I do the Cookidoo® recipes for the Thermomix® Cutter only when owning one?
No, you can do all recipes that ask for a Thermomix® Cutter also without it by manually slicing or grating the ingredients where it is asked for.
Article is closed for comments.